RESEARCH CONCEPTS RC3000 Manual do Utilizador descarregar pdf (Página 6)

7b) if no positive identification of any signpost is accomplished, the

LOCATE will stop and display a message indicating something like "NO

POSITIVE IDENTIFICATION". The hpa disable signal will remain to prevent

transmission. I feel that no answer is better than a potential wrong

answer.

7c) if a positive id is confirmed, an azimuth delta will be computed and

used to fix the original heading estimate. We then go to step 8.

“SIGNPOST FOUND- GO TO SELECTED SATELLITE”

8) with the heading fixed, we can then move to the selected satellite with

confidence.

9) the polarization angle is adjusted according to which direction the

satellite is with respect to the tilt of the platform. Hopefully this will

leave the pol axis positioned to achieve 30 db isolation.

"ADJUST POL TO COMPENSATE FOR TILT"

10) a final RF peakup is performed to put the dish on the selected satellite

as well as possible.

NOTE: this peak up will not occur if the positive identification feature is “enabled without

lock” in the DVB ID configuration screen (3.3.1.1.x).

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

RESEARCH CONCEPTS RC3000 Manual do Utilizador Página 6